Product Details

PVC/Rubber Water Stopper

Details

“Softex” PVC water stop seal provides water barrier across all joints in concrete structures by placing water stops into edges of adjacent concrete components. Water stops are essential for use in all water retaining and water excluding structures, being capable of withstanding water pressure from either internal or external face. Softex pvc water stopper profiles are made of extruded polyvinyl chloride (pvc) conforming to IS:12200 and IS:15058. Material for water stops is clean, homogenous and free from porosity and other imperfections. We make in various designs as per standard designs & customer requirements. We make upto 500 mm width stoppers for special applications.

We make in various designs:

  • Central Bulb with corrugated sides
  • Dumb Bell Type
  • Kicker Type
  • Any other design as per customer requirements

We make them in various widths:

  • 150 mm(6 inch)
  • 180 mm
  • 230 mm(9 inch)
  • 250 mm
  • 300 mm(12")
  • Any other width as per customer requirements. We have made 500 mm width Water Stopper also. We make is both IS quality (generally in White color) & standard quality(black color).

Additional Information:

  • Corrosion resistant
  • Excellent weather resistant, suitable for tropical
  • Climate.
  • Good mechanical strength
  • High elasticity
  • Ability to withstand high hydrostatic pressure

ELASTOMERIC BEARING PADS

Details

We manufacture Elastomeric Bearing Pads/Neoprene Bearing Pads/Bridge Bearing pads which are used extensively in bridge structures and prestressed and precast concrete buildings. Also used in industrial machinery and heavy equipment applications. Manufactured as per Section 2005 Ministry of Surface Transport (Road Wing) Specification for Road & Bridge Works (3rd Rev) & IRC: 83-Part-II, BS & AASHTO standards.
Elastomeric Bearing Pad offered by us is well acclaimed among clients for the below enlisted points:
  • High tensile strength
  • Optimal functioning
  • Ozone resistance
POT PTFE BEARINGS
RFQ

POT PTFE BEARINGS

Details

We manufacture POT PTFE BEARINGS- including fixed pot bearings, sliding guided pot bearings and free sliding pot bearing. Pot Bearing design is based on calculation of IRC: 83 (Part III)-2002. The basic elements of a Pot Bearing consists of a shallow cylinder, known as pot, an elastomeric pad known as disc, a single or set of sealing rings, piston and sliding surfaces. Masonry plates and base plates are common for the installation of pot bearings, as they allow attachment of the bearings and increase the support area on the pier and abutment. Pot bearings are fixed against all translation unless they are used with a PTFE sliding surface.
STRIP SEAL EXPANSION JOINT FOR BRIDGES
RFQ

STRIP SEAL EXPANSION JOINT FOR BRIDGES

Details

COMPRESSION SEAL EXPANSION JOINTS
RFQ

COMPRESSION SEAL EXPANSION JOINTS

Details

Expansion Joints: Rubber/Metallic/Fabric based/PTFE expansion joints in various sizes and designs viz. Single arch, multi arch, tapered, offset and fitted arch. Joints can be supplied with retainer rings and control units.

Bellows: We make rubberized fabric and canvas bellows tailor made to fitment design. They are used as flexible joints in vibrating systems and as cover for piston rod and other moving components. Bellows are made with/with out reinforcement in Neoprene, Silicone and natural rubber for various industries like Steel, Aluminium, Food processing and others. We also make PTFE/Graphited PTFE bellows as per customer requirements.

Expansion Bellows: Size range 80 NB to 1500NB in pressure ratings from 1 to 16 Bar

Suction Bellows: For hydraulic pipelines with with out flanges from 25NB to 200NB

 

SLAB SEAL EXPANSION JOINT FOR BRIDGES
RFQ

SLAB SEAL EXPANSION JOINT FOR BRIDGES

Details

Softex Expansion Joint Filler Board is a Cross linked Closed cell Polymer. It is widely known as compressible Expansion Joint Filler Board and isflexible as well as has high compression-recovery, therefore suitable for application at places which require readily compressible low load. This filler board is nontainting and therefore suitable for use in potable water retaining and water excluding structures. It is very light weight and easy to handle and install. It can withstand severe weathering conditions and shows no sign of disintegration or degradation. It is a sheet form in semi-rigid, UV resistive, high performance laminated closed cell polyethylene foam joint filler. It is suitable for use as expansion joint filler in concrete, brick, block work and isolation joints where readily compressible low load transfer joint filler is required.
BITUMEN IMPREGNATED EXPANSION JOINT FILLER BOARD
RFQ

BITUMEN IMPREGNATED EXPANSION JOINT FILLER BOARD

Details

We manufacture Bitumen impregnated Fibre Board capable of expansion and contraction, generally placed between two slabs. In the construction of runways, roads and buildings, involving the casting of concrete in slab form, provision must be made to accommodate the expansion and contraction which occurs with seasonal variations in temperature. Our Bitumen Board serves that purpose. We generally manufacture in size 1.22 mtr(4 ft) x 1.22 mtr(4 ft) in different thicknesses. We supply to all the major construction companies in India.

We make in various designs:

  • High tensile strength
  • Optimal functioning
  • Ozone resistance
  • Any other design as per customer requirements

Our Bitumen Expansion Joint Fillers conform to the following standards:

  • ASTM -D. 1751-83/D.545 - 84 Testing
  • concrete paving and structural construction
  • pre-formed expansion Joint Fillers for concrete
  • Department of Transport - London 1986: `specification to highway works, part 3, clause 1015
  • B.S. 1142 for Standard Specifications for Expansion Joint Fillers. IS 1838(Part-I) 1983 Standard Test of Expansion Joint Fillers
POLYMER BASED/POLYETHYLENE EXPANSION JOINT FILLER BOARD
RFQ

POLYMER BASED/POLYETHYLENE EXPANSION JOINT FILLER BOARD

Details

POLYSTYRENE BASED FILLER BOARD
RFQ

POLYSTYRENE BASED FILLER BOARD

Details

Owing to our immense expertise of three decade in this domain, we are betrothed in manufacturing, exporting and supplying superior quality Polystyrene Foam Board. This board is manufactured using top notch grade polystyrene and contemporary techniques with the help of our experienced professionals. The provided board is convenient to be used for the insulation of walls and roofs at commercial places. Also, it absorbs moisture and provides long lasting finish to concrete structures. The offered Polystyrene Foam Board can be bought from us in various sizes and finishes within a stipulated time frame.

Key points:

  • Extremely fine texture
  • Ability to withstand adverse conditions
  • High durability
  • Easy to install
EPE BACKER RODS
RFQ

EPE BACKER RODS

Details

Softex PE Backer Rod is a closed cell, polymer based product with circular profile. It ensures stronger bonding of sealant with masonry, aluminium or other substrates & helps to maintain desired thickness of sealent at the joint’s center. It does not bond with cold applied sealant. It acts as a cost-effective space filler to reduce the consumption of selent.

Features & Benefits

  • Closed cell : Negligible water / moisture absorption
  • Bitumen free : Non-staining
  • Excellent chemical resistant : Insert to alkalis and most acids
  • Does not disintegrate
  • Cost-effective filler : Allows unreistrained expansion & contraction of sealant
  • Eliminates bubbling consumption
  • Reduces sealant consumption

Applications

  • Pre-cast panel joints
  • Expansion joints
  • Window and door frame perimeters
  • Coping joints
  • Glazing joints
  • Isolation joints
  • Control joints
  • Contraction joints
  • Dynamic joints in masonry, etc.
DEBONDING STRIP
RFQ

DEBONDING STRIP

Details

We are engaged in offering an exclusive range of Debonding Strip.

Specifications:

  • Size Customized as per client requirement.

Usage:

  • usage of paper backed debonding strips results in better performance of sealant in joints and also is cheaper than EPE foam backer rods.

Features:

  • Fine finish
  • Compact design
  • Quality approved
POLYSULPHIDE SEALANT
RFQ

POLYSULPHIDE SEALANT

Details

SOFTEX manufactures Industrial Polysulphide Sealants. This is a two-part Polysulphide and requires on-site mixing which cures chemically. These are available in Gun grade as per BS 4254 and pouring grade as per BS5212.

Uses:

  • Polysulphide is widely used in construction/expansion joints of pavements airport runways and buildings.

Features:

  • Cures to form an Impermeable material
  • Accommodate the joint by deformation
  • Accommodate cyclic changes like temperature, moisture, vibrations etc.
  • Strong adhesion with the joint faces, no peeling at the corners when there is a deflection of joints.
  • Good impact resistance without cohesion failure, resist the load, stress due to compression, tension and impact.
  • Must resist flow due to gravity.
  • Should have a good flexibility at all service temperatures.
  • Not adversely affected by ageing, weathering, freezing of water, light, water vapour, a growth of the fungus and human damage.
  • Good fire resistance and fuel resistance.
  • Partial reparability.
  • Low maintenance cost.
SEALING COMPOUND AS PER IS 1834
RFQ

SEALING COMPOUND AS PER IS 1834

Details

SOFTEX Joint Sealing Compound is used as a sealant in the construction of runways. It conforms to IS 1834.

Applications:

  • Runway Joints
  • Joints in garages, filling stations and other places of construction joints like in warehouse floors and secondary containment of walls and floors of artificial water ponds
  • Bridge / road joints

Advantages:

  • Jet exhaust heat resistant
  • Good adhesion to concrete / other surfaces
  • Low susceptibility to flow during hot weather condition
  • Resistant to sunlight /rain and cyclic temperature changes
  • Anti-corrosive and prevents root growth
  • Resistant to ingress of foreign substance
EPDM WATER PROOFING MEMBRANE SHEET
RFQ

EPDM WATER PROOFING MEMBRANE SHEET

Details

The life of any building is dependent on the designer recognizing and considering all the factors relevant to its location, shape and function of the building. Reliable Roofing is the most important part which decides the quality & ultimately the life of the building. An efficient roofing sheeting should never allow even small traces of water to pass through at any given point and should maintain the characteristics over a long period of time. It should withstand slight movement of the structure, bad weather, chemical degradation and mechanical stress & strain.

EPDM Water Proofing membrane is the perfect solution!

  • It meets the stringent requirement of good water proofing sheet. It has 100% EPDM polymer content making it an ideal choice for the water-proofing of roofs, swimming pools, foundations for civil constructions, soak pits for animal feed, gobar gas plants, canals etc. With a life that spans 20 years, it is the best choice for waterproofing applications. In the long run, it is more economical than traditional water proofing systems.
  • This membrane is produced in accordance to ASTM D4637 and ASTM 6134. The sheet conforms to all requirements for non-reinforced black EPDM Rubber sheet for use in waterproofing applications.
PVC HANDRAIL IN DIFFERENT SIZES & COLORS USED IN BUILDING STAIRC
RFQ

PVC HANDRAIL IN DIFFERENT SIZES & COLORS USED IN BUILDING STAIRC

Details

We are an ISO 9001:2008 certified manufacturer-exporter of PVC Hand Rails and supply to a number of reputed construction companies in India & abroad for their various residential & commercial properties.

We make them in various widths:

  • 30mm
  • 40mm
  • 50mm
  • 65mm
  • 75mm

Standard color is Black.

However, if the quantity is more than 500 mtrs then we can make in any size as per your requirement and also in any other colors also viz. Grey, Red, Brown etc. Please arrange to mail us drawing of the Hand Rail required by you or send us small sample for our doing the needful. Please be free to contact us if you need any further clarification/information from us.

PVC CHAMFERS IN VARIOUS SIZES
RFQ

PVC CHAMFERS IN VARIOUS SIZES

Details

SEAL KITS FOR HEAVY EARTHMOVING MACHINERY
RFQ

SEAL KITS FOR HEAVY EARTHMOVING MACHINERY

Details

RUBBER SEALING RINGS FOR PIPE LINES
RFQ

RUBBER SEALING RINGS FOR PIPE LINES

Details

  • O-Rings for CID Joints(IS 5382:1969 & IS 10292) from 80-600mm
  • Rubber Gaskets for Mechanical Joints(IS 5382 and IS 12820) from 80 mm to 1500 mm
  • Push on Joints – TYTON Gaskets(IS 5382 & IS 12820) from 80mm -1000 mm
  • Rubber Ring Roll-on Joints(IS 458-1988) from 80 mm-2200 mm
    CONVEYOR BELTINGS
    RFQ

    CONVEYOR BELTINGS

    Details

    • We are manufacturer and exporter of Rubber Conveyor belts which constitute Nylon/Nylon (NN), Polyester/Nylon (EP), Cotton/Nylon (CN), Cotton/Cotton (CC). It has carcass with straight ply, stepped ply, reverse stepped ply, breaker ply and “edge-lock” where required.
    • The above constructions, with a wide range of protective rubber covers, are manufactured in widths up to 2000 mm in a most modern automated plant, using the finest raw material inputs.
    • Length: Open or endless upto 500 mtrs in single length provided the diameter does not exceed 10 feet. Fabrics plies: 2 plies to 8 plies.
    LDPE SHEET
    RFQ

    LDPE SHEET

    Details

    LDPE SHEET, UPTO 1 MM(1000 MICRON) THICK USED AS WATERPROOFING MEMBRANE SHEET.
    • The life of any building is dependent on the designer recognizing and considering all the factors relevant to its location, shape and function of the building. Reliable Roofing is the most important part which decides the quality & ultimately the life of the building. An efficient roofing sheeting should never allow even small traces of water to pass through at any given point and should maintain the characteristics over a long period of time. It should withstand slight movement of the structure, bad weather, chemical degradation and mechanical stress & strain.
    • EPDM Water Proofing membrane is the perfect solution!
    • It meets the stringent requirement of good water proofing sheet. It has 100% EPDM polymer content making it an ideal choice for the water-proofing of roofs, swimming pools, foundations for civil constructions, soak pits for animal feed, gobar gas plants, canals etc. With a life that spans 20 years, it is the best choice for waterproofing applications. In the long run, it is more economical than traditional water proofing systems.
    • This membrane is produced in accordance to ASTM D4637 and ASTM 6134. The sheet conforms to all requirements for non-reinforced black EPDM Rubber sheet for use in waterproofing applications.
    SPARE PARTS OF BOOMERS OF ATLAS COPCO (L2D), TEMROCK (AXERA & RO
    RFQ

    SPARE PARTS OF BOOMERS OF ATLAS COPCO (L2D), TEMROCK (AXERA & RO

    Details

    SPARE PARTS OF SHOT CRETE MACHINE OF ALIVA & LOCAL INDIAN MAKE
    RFQ

    SPARE PARTS OF SHOT CRETE MACHINE OF ALIVA & LOCAL INDIAN MAKE

    Details

    FLEXIBLE STORAGE CONTAINERS
    RFQ

    FLEXIBLE STORAGE CONTAINERS

    Details

    We are a leading manufacturer-exporter of Bio Gas Storage Balloons. Biogas Balloon is a collapsible, intermediated storage tank. Biogas balloon eliminates the use of conventional metal tank, currently used as intermediate storage.

    We have great expertise in manufacturing a comprehensive range of gas storage balloons. Made of premium quality plastic coated fabrics these products are used for the storage & transfer of methane gas. These storage systems are made according to the users’ requirements and catered to various domestic as well as industrial sectors. Our organization has gained vast expertise in offering a superior range of Bio Gas Balloon which is highly demanded for their sturdy construction, perfect finish and longer service life. Our ranges of these are used to fill biogas that is used for various industrial applications. These are checked stringently by quality analysts to ensure that defect free range is supplied to our customers.

    A special protective lacquer imparts chemical resistance property to the fabric. The chemical resistance property is required as the fermentation of manures produces gases such as methane, carbon dioxide, carbon monoxide and nitrogen that needs to be protected

    Why Our Biogas Balloon?

    • Precision-engineered
    • Eco-Friendly both side Plastic coated fabric
    • Quality tested
    • Maintenance free and long life
    • Competitive price

    Applications:

    • Industrial Balloons made of special rubber fabric are used as flexible storage tanks for Liquid Nitrogen which is used as coolants for transformer oil.
    • It is also used as Storage for Helium Gas.

    Other applications:

    • Fertilizer
    • Power and Oil & Gas industries as flexible storage tanks.
    RUBBER & PU TRACK PADS FOR WIRTGEN AND OTHER PAVER MACHINES
    RFQ

    RUBBER & PU TRACK PADS FOR WIRTGEN AND OTHER PAVER MACHINES

    Details

    VARIETY OF WASHERS, RINGS, OIL SEALS, BELTS, DIAPHRAGMS, CHEVRON
    RFQ

    VARIETY OF WASHERS, RINGS, OIL SEALS, BELTS, DIAPHRAGMS, CHEVRON

    Details

    • O rings, V rings, oil seals, U seals, wiper seals, chevron packings
    • V-rings – various sizes in E, L, S, A sections of forsheda ‘V’ rings for high speed sealing made of NBR & viton rubber
    • O-rings & quad rings – in silicon, viton, neoprene & NBR rubber in various sizes for perfect sealing.
    • We have successfully developed a number of standard metric sizes for various shaft diameters of endless or split Walkerseles in M1 material and D6 design.
    VARIOUS METAL TO RUBBER/PU BONDED PARTS
    RFQ

    VARIOUS METAL TO RUBBER/PU BONDED PARTS

    Details

    SEAL KITS FOR VARIOUS HYDRAULIC & PNEUMATIC CYLINDERS
    RFQ

    SEAL KITS FOR VARIOUS HYDRAULIC & PNEUMATIC CYLINDERS

    Details

    Our organization also offers Hydraulic and Pneumatic Seals with rotary or reci-procating motions. These seals are designed for high pressure and high operating speed applications and are extensively used in a variety of sectors. We fabricate these seal kits for different cylinder makes such as Wipro, Oscar, Vickers, Usha Telehoist, Schradder, Veljan Hydrair, and many others. Clients can provide us sample drawings and specifications on the basis of which we can manufacture these seals. The entire range consists of U & W seals, Piston seals, Rod seals, Chevron Packings, Gland Packings & Lip Packings, Wiper seals, Guide rings, Cup seals, Tudco Seals, Step Seals, Turcite Glyde Rings & any other seal of any section & material viz. Viton, Nitrile, Silicone, PTFE, Bronze/Glass Filled PTFE, FRP and PU
    SPONGE BALL FOR CONCRETE IN VARIOUS SIZES & HARDNESSES
    RFQ

    SPONGE BALL FOR CONCRETE IN VARIOUS SIZES & HARDNESSES

    Details

    VARIETY OF HOSES INCLUDING HYDRAULIC HOSE WITH END FITTINGS
    RFQ

    VARIETY OF HOSES INCLUDING HYDRAULIC HOSE WITH END FITTINGS

    Details